Cloud Setup

Put your camera in Cloud Mode

Welcome to the NetCamPro Cloud Setup! At this point we assume that your camera has Internet connectivity and that it can be accessed by NCPL. We recommend using a computer for setting up Cloud. If you’re planning on using your iPhone or iPad to set up Cloud, please install Dropbox, Google Drive, or iCloud on your mobile Apple device.

Cloud setup requires the camera to be on the same Local Area Network (LAN) as the person setting it up. The LAN connection to the camera can be wireless or wired. Cloud setup cannot be done easily over the Internet without the http port forwarded to the camera.

Let’s get started!

Enter your camera’s IP address into your browser’s URL field (ex.: and click on Settings.

What’s my IP? Find Your IP.

Every NetCamPro camera has a built in administration web site. This web site can be accessed with a web browser by entering the camera’s IP address in the URL field.

Find Your IP

For best user experience with the Cloud we recommend using Google Chrome on your Mac, Windows PC, or mobile device.

Log in as admin using your camera’s admin password. The default username and password are admin/admin“.

NetCamPro Cloud Setup 02

If you are still using the default password we highly encourage you to Change Your Password

On Apple iOS devices please use Dropbox, Google Drive, or iCloud to save the config.cfg file.

On the right hand side, click on Tools (1), Backup or Reset (2), then Backup (3) and save the file called config.cfg on your device.

NetCamPro Cloud Setup 03

Do not attempt to open the config.cfg. This file is specific to the cameras and not recognized by other applications. Opening this file might damage it.

Save the file config.cfg in your Downloads folder.

NetCamPro Cloud Setup 04

Open a new tab in your browser and go to:

Alternatively type in and click Create an account.

NetCamPro Cloud Setup 05

The Cloud Setup Wizard converts your camera’s config.cfg into a second file called new_config.cfg. Enter your Account Email (1), choose the previously downloaded config.cfg (2) and click Upload (3).

NetCamPro Cloud Setup 06

The Cloud now creates the account and sends out a notification email.

NetCamPro Cloud Setup 07

Check your email and click on Activate Cloud Storage.

NetCamPro Cloud Setup 08

Set your 8 digit password, choose your timezone, and click next. You will be redirected to the login page.

NetCamPro Cloud Setup 09

Login using your password and your previously created password.

NetCamPro Cloud Setup 10

Download and save the new_config.cfg file. Please do not attempt to open the file. Click Return to Home Page.

NetCamPro Cloud Setup 11

Saving your new_config.cfg file alongside your initial config.cfg.

If you have more than one camera you can rename the config.cfg and new_config.cfg to differentiate between cameras, e.g. cam1-config.cfg and cam1-new_config.cfg.

NetCamPro Cloud Setup 12

The new_config.cfg needs to be restored into your camera. Go back to the Network Camera Home Page tab.

NetCamPro Cloud Setup 13

On your Network Camera Home Page, click on Tools (1), then Backup or Reset (2). Click Choose File (3) and locate the new_config.cfg, then click Restore (4).

NetCamPro Cloud Setup 14

Reboot your camera. Wait 45 seconds for the camera to boot up.

NetCamPro Cloud Setup 15

Return to the Cloud (1) homepage. Click the Camera (2) icon to refresh the page.

Trigger motion in front of camera to test sending to the Cloud.

First time images can take up to three minutes to arrive.

NetCamPro Cloud Setup 17

You successfully completed the Cloud Setup!

Continue to Take the Tour